Tech Tip

Posted by Jeff Coulter on

Tech Tip

Tech Tip - a continuing series.

The M200/M300/M200 Plus/M300/M300 Plus Extruder PCB.
A while back they started providing the same part for both the "Classic" M200 and M300 and the Plus Series of printers with regards to the Extruder PCB.
The Plus Series PCB can be used on the "Classic" systems, but you need to pay special
attention to the fan connector, as the Plus systems have two fans on the Extruder.
Please see the diagram on how to deal with this, and those of you with the Plus systems
also need to make note of which fan is plugged in to which blue socket.

For more help with your Zortrax systems, get the parts you need, or send it to us for a tuneup.

We have the parts you need to do it yourself here.

If you don't see it, please get in touch - we probably have it.

Or contact us to arrange a visit to our service bench here.


Share this post



← Older Post Newer Post →