News

Tech Tip Tech Tip - a continuing series. Resetting the calibration data on your ZMorph. Sometimes your ZMorph VX or FAB will misbehave, and start air printing a couple of mm above the glass, even after a successful Autocalibration. This is the procedure to reset the stored data: Instructions Here. The trick is to make sure to press the RESET button on the right after doing this. If you power it off instead you will need to do this again. Contact us if you need some help with this.

Tech Tip Tech Tip - a continuing series. The M200/M300/M200 Plus/M300/M300 Plus Extruder PCB. A while back they started providing the same part for both the "Classic" M200 and M300 and the Plus Series of printers with regards to the Extruder PCB. The Plus Series PCB can be used on the "Classic" systems, but you need to pay special attention to the fan connector, as the Plus systems have two fans on the Extruder. Please see the diagram on how to deal with this, and those of you with the Plus systems also need to make note of which fan...

We have another FRESH batch of Raise3D E2 systems in stock - they won't last! We have fresh stock HERE NOW and READY TO SHIP, but they won't last forever! We are struggling to keep these in stock - get one NOW without waiting. Get your E2 or a startup bundle while they last! Get this turnkey startup bundle with everything you need to get started and keep you going for MANY prints. No need to worry about ordering more filament or supplies for a while - you are all set for hundreds of hours of printing! The Raise3D E2...

Need help with your Zortrax? Need some help or some parts for your Zortrax printer? Get the parts you need, or send it to us for a tuneup. We have the parts you need to do it yourself here. Or contact us to arrange a visit to our service bench here.  

Prepare files for printing with Raise3D’s unique 3D slicer software - ideaMaker. Just released, the newest and most updated version of ideaMaker slicing software with new features and improvements! Easily create textures Customize your support Use automatic parameters for optimization Improve 3D Printed Parts by Fine-Tuning Parameters Region by Region Freely Adjust Models on Demand Get Free Template Immediately Connect seamlessly with RaiseCloud and ideaMaker library for a perfect integrated workflow and more!  Download this version for FREE now.