Menu
Cart 0

3DPrintClean 660 PRO 3D Printer Enclosure

3DPrintClean

  • 2,69500


3DPrintClean 3D Printer Enclosures - Independently Tested and Verified UFP and VOC filtration solution

ALL 3DPRINTCLEAN ENCLOSURE PRICING IS DELIVERED!

At Profound3D.com, there is no additional shipping charge for 3DPrintClean Enclosures.  The 660 PRO 3D printer enclosure ships via LTL freight service (curbside delivery).  The 660 PRO is a large, heavy-duty enclosure (shipping weight is approximately 110lb, shipping dimensions approximately 35" w x 35" x 40" h), so please plan for delivery accordingly.

Enclosure only - 3D printer not included

3DPrintClean 660 PRO 3D Printer Enclosure Features:

  • UFP and VOC Filtration
  • Thermal Runaway Protection
  • Humidity Control
  • Heated Build Chamber via Total Heat Recovery
  • Touch Screen
  • Studio Lighting
  • Noise Dampening
  • Burn Prevention
  • Theft Prevention
  • Door Sensor
  • WiFi
  • Powder Coated Aluminum Frame
  • Custom Formulated EPDM Sponge Rubber Door Seals
  • Aluminum Honeycomb Floor
  • UL 94 V-0 Fire Retardant Plastic Filtration System
  • Shatterproof Polycarbonate Windows
  • A2 Stainless Steel Bolts and Nuts
  • Adjustable Height and Angle Leveling Feet
  • Made in the USA

Supported Printers
(If you don’t see your printer, call us and we will recommend the proper enclosure for you.
)

  • Ultimaker
  • Ultimaker Extended
  • MakerBot Replicator
  • MakerBot Replicator Mini
  • LulzBot Mini
  • Zortrax M200
  • MakerGear M2
  • WitBox
  • Formlabs
  • Robo
  • Dremel Idea Builder
  • Flashforge

UFP AND VOC FILTRATION
Patent pending Multi-Pass recirculating filtration technology confines, and repeatedly scrubs the contaminated air. Each pass through the filter media removes a small percentage of the total UFPs and VOCs until the majority has been removed. The process can run hundreds, to thousands of times, depending on the print duration.

3DPrintClean's enclosures have been independently tested and verified by IIT, The Illinois Institute of Technology, the university that first identified UFPs and VOCs emissions from 3D printers, and the related health concerns.

CUSTOM FORMULATED EPDM SPONGE RUBBER DOOR SEALS
EPDM Rubber compresses to form a optimal door seal, is tear resistant, and offers a UL94HB fire rating.

ADJUSTABLE HEIGHT AND ANGLE LEVELING FEET
Adjust the height and angle of each foot to assure a level printing environment.

THERMAL RUNAWAY PROTECTION
Thermal runaway is where a printer's temperature regulator fails. Unchecked, thermal runaway can lead to printer damage and a fire. Our enclosures monitor the temperature, and if needed, terminates power.

AUTOMATIC FIRE SUPPRESSION - (optional accessory - must be factory installed)
In the event of a fire, the automated fire suppression system activates, filling the enclosure with ABC fire suppressant. Applied to hot and smoldering surfaces, ABC powder fuses and swells to form a barrier which excludes oxygen, extinguishing the fire, and preventing re-ignition.

This system contains the fire within the enclosure, preventing expensive, smoke, fire, and water damage to the building.

HUMIDITY CONTROL
Humidity can damage your filament, resulting is blocked extruders and failed prints. All of our enclosures come with a large, non-toxic, orange silica cartridge that reduces humidity, and visual indicates when the cartridge needs to be changed. In addition, the enclosure touchscreen displays the current humidity level.

A humidity cartridge is also available for our cabinet to keep your stored filament dry.

HEATED BUILD CHAMBER
Maintaining a elevated temperature in the enclosure improves print quality by reduce warping, curling, and cracking.

Our eco-friendly, total heat recovery, heated build chamber, not only captures, and contains the heat generated from your printer's print head, and print bed, but captures all heat from the enclosure's power transformers, LED lights, and other electronics.

TOUCH SCREEN
Our enclosure features with a 7" Touchscreen, the touchscreen displays the camera status, Wifi indicator, system status, current filtration speed, lighting level, temperature, humidity, thermal cutoff level, and number of days until your next filter change.

A setting icon, enables you to set enable/disable the camera, enable/disable and change Wifi setting, set location, adjust the lighting level, adjust the thermal cutoff temperature, adjust the filtration speed, and reset the filter counter when replacing the filters.

An update icon will appear when new features are available.

STUDIO LED LIGHTING
Showcase your printer, and print, with 2400 lumens of 5000K dimmable, bright white light.

DOOR SENSORS
Our enclosures feature three sensors that detect when one, or more doors, are open. When open, the touchscreen presents a visual warning, and the enclosure disables the filtration system. This ensures all doors are closed during printing, which is required for proper filtration.

WIFI
WiFi enables software updates.

NOISE DAMPENING
Printers can be noisy, our enclosure suppresses the noise, enabling a more peaceful and focused workplace.

USB PASSTHROUGH
To support printers that would like to use, or require, USB connections, the USB pass through enables USB connectivity within the enclosure's sealed environment.

FILAMENT SPOOL HOLDER - (optional accessory, must be factory installed)
Many printers come with sub optimal filament reel locations, making them a challenge to fit into an enclosure. Our spool holders replace your printer spool holder, holding two spools of filament, in an optimal location over your printer.

Our spool holders are adjustable, to accommodate almost any filament spool.

DYNAMIC CASTORS - (optional accessory)
Our castors not only enable you to move your printer from room to room, but transform your enclosure into a stationary solution. At the turn of a knob, large rubber feet deploy, raising the castor wheels from the ground.

LOCKING DOORS
Locking doors prevent unauthorized use, theft, and keeps small hands away from hot parts.

PRINTER ACCESS
Three full height doors, with 170 degree openings and a wide top window provides un-obstructive access, and visibility to your printer.

NEW FEATURES ARE JUST A CLICK AWAY
Our team is developing a host of features to dramatically expand your enclosure's capabilities. When ready, these features will be available via download, at no additional cost.

FILTRATION MOTOR
150 CMF German 3-phase Backward-curved impeller, high efficiency with ball bearing smooth operation, and a 55,000 hour/6.2 years of continuous use service life.

YEARS OF SERVICE
As printers get faster, offer higher resolution, and more material choices, upgrades are inevitable.

Built from the highest quality parts, a heavy aluminum frame, honeycomb aluminum flooring, and strong plastics, our enclosures will last for many printer generations.

Includes:

  • 1 UFP Filter
  • 1 VOC Filter

3DPrintClean 660 PRO Enclosure Specifications:

Hardware:

  • 19" UFP Filter
  • 19" VOC Filter
  • 7" LED Touch Screen
  • 2.4GHz 802.11n WiFi
  • 1.2GHz 64-bit quad-core ARMv8 CPU
  • 1GB RAM
  • 1080p HD Video Camera
  • Dehumidifier Cartridge
  • Door Sensors
  • 150 CFM, 24V, 3-phase, Speed Adjustable Filtration Blower Motor
  • 5V/12V/24V Transformers
  • LED, 2400 lumen, 5000K, 40W
  • Universal 115v/220v AC input

Consumables:

  • 19" UFP Filter (Replace Annually/5 year sealed storage)
  • 19" VOC Filter (Replace Annually/5 year sealed storage)
  • Dehumidifier Cartridge (Change when color turns from Orange to Green)

Construction:

  • Powder Coated Aluminum Frame
  • Custom Formulated EPDM Sponge Rubber Door Seals
  • Aluminum Honeycomb Floor
  • UL 94 V-0 Fire Retardant Plastic Filtration System
  • Shatterproof Polycarbonate Windows
  • A2 Stainless Steel Bolts and Nuts

Power Consumption

  • Controller 5V - 1.5W to 6.7W
  • LED Screen 5V - 2.5W
  • Lighting 12V - 0 to 40W
  • HD Camera 5V - 1.25W
  • Filtration 24V - 0 to 78W

Dimensions and Weight

  • External (W x H x D): 800 x 950 x 810 mm [31.5" x 37.40" x 31.88"]
  • Internal (W x H x D): 600 x 810 x 600 mm [23.62" x 31.88 x 23.62"]
  • Internal dimensions: Duct to duct 495.3mm [19.5"] W
  • Internal dimensions Duct to filter 495.3mm [19.5"] D
  • Internal dimensions Door to door 641.35mm [25.25"] W
  • Internal dimensions between ducts 647.7mm [22.5"] D
  • Weight: 32Kg/70lb

Testing and Certification

  • Filtration Solution Independently validated by the Illinois Institute of Technology, a school, and a public company
  • UL United States, UL Canada, Europe CE

Delivery:

  • Ships fully assembled