LulzBot TAZ Pro - Industrial, Multi-Material Desktop 3D Printer

  • $ 4,950.00

Only 0 left!

ASK A QUESTION

TAZ Pro delivers the superior 3D print quality and easy, professional results you expect from a LulzBot 3D printer.

The LulzBot Taz Pro is an industrial desktop 3D printer.  It features a large print volume (11.02" x 11.02" x 11.22") and a dual extruder that enables multi-material 3D printing and the ability to print soluble supports, all with LulzBot's award-winning reliability. 

LulzBot TAZ Pro Key Features:

  • Key Technical Specifications
    • Tool Head: TAZ Pro Dual Extruder, 2x E3D 0.50mm nozzle
    • Filament diameter: 2.85mm
    • Layer Resolution: 0.05 mm - 0.4 mm (0.002 in - 0.02 in)
    • Max Hot End Temperature: 290°C
    • Print Surface: Borosilicate Glass/PEI
    • Max Print Surface Temperature: 120°C
    • Leveling: Automatic Z-Axis Compensation
    • Calibration: Automatic X/Y/Z Offset Calibration
    • Certifications: FCC, CE, WEEE, ETL by Intertek (UL), CA, CSA, RCM, OSHWA
  • Two active-lifting hot ends - TAZ Pro's dual extruder  tool head (included) features two active lifting hot ends for 3D printing with two unique materials (with similar melting points) within the same 3D printed model.
  • 3D print with soluble supports - TAZ Pro can 3D print with water-soluble support material, giving the freedom to print complex geometries and eliminating time-consuming manual post-processing.
  • Works with high-strength, rigid, and flexible materials - TAZ Pro has hardened steel components and E3D Titan Aero extruder/hot ends that can handle 3D printing high-strength, high-heat composite materials, as well as 85A shore hardness TPU flexible materials without having to change tool heads.
  • Automatic calibration - No need for time-wasting calibration prints and manual bed leveling with the TAZ Pro.  It features an innovative calibration cube that measures and compensates for X/Y/Z backlash for increased part precision, as well as a self-leveling print bed and automatic nozzle wiping
  • 5" color touch screen interface - TAZ Pro's easy-to-use full color capacitive touch screen brings improved visibility and added functionality.
  • Dual filament runout sensors - Prints won't fail if you run out of material
  • Belt-driven Z-axis - LulzBot's exclusive Z-axis belt-drive technology speeds up cycle times and eliminates "Z wobble" often caused by threaded rods
  • Enhanced electronics - TAZ Pro's enhanced electronics, such as its cable chain for added protection of wires, Trinamic TMC2130 drivers, and 32-bit Archim Rambo Board, deliver greater processing power, more memory, quiet operation, and additional functionality.
  • Open filament system - Use the filament material that you want to use, including flexible, rigid, composite, conductive, high strength, and chemically-resistant filaments. TAZ Pro works with dozens of materials and Cura LulzBot Edition features 300 quickprint profiles.
  • 1 Year Warranty - Includes one-year limited warranty from LulzBot and access to LulzBot's Colorado-based technical support seven days a week. Optional one, two, or three-year extended warranties available (see the standard warranty policy and extended warranty terms and conditions for details).

LulzBot TAZ Pro Specifications:

Printing
Print Technology Fused Filament Fabrication
Print Area 280 mm x 280 mm x 285 mm (11.02 in x 11.02 in x 11.22 in)
Print Volume 22,344 cm³ (1,362.56 in³)
Ambient Operating Temperature From 5°C to 45°C (41°F to 113°F)
Operating Footprint 83.2 cm x 71 cm x 52 cm (32.76 in x 28 in x 20.47 in)
Maximum Travel Speed 200mm/s
Leveling Automatic Compensation
Calibration Automatic X/Y/Z offset calibration
Connectivity USB Serial and Included 4gb SD Card
Included Tool Head TAZ Pro Dual Extruder
Extruder/Hot End 2x E3D Titan Aero
Nozzle Diameter 0.5mm
Nozzle Material Hardened Steel
Nozzle Temperature Up to 290°C (554°F)
Nozzle Heatup Time From 18°C to 230°C (64°F to 446°F) in 1 minute, 36 seconds
Print Surface Modular Heated Borosilicate Glass/PEI
Maximum Print Bed Temperature Up to 120°C (248°F)
Print Bed Heat Up Time From 18°C to 100°C (64°F to 212°F) in 10 minutes, 45 seconds
Layer Resolution 0.05mm-0.4mm (0.002"-0.015")
Minimum Positive Feature Size 0.5mm (0.02in)
Calculated XYZ positional resolution 10, 10, <1 micron
Materials
Filament Diameter 2.85mm
Supported Materials Open filament system compatible with PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments.
Additional Items Included
Comprehensive Tool Kit Includes: Hangable LulzBot bag, replacement wiper pads, part removal tool, scrub pads, glue stick, precision knife, long nose pliers, 7 piece hex key set, metric ruler, dental pick, and tweezers.
Comprehensive Documentation Includes: USB flash drive with source files, Quick Start Guide, Quality Assurance Record, and more.
First 3D Print Material A small length of PLA filament is included to be used in your first 3D print, the LulzBot Rock2pus!
Physical Dimensions
Boxed Unit Weight 20.86 kg (46 lbs)
Unit Weight 16.78 kg (37 lbs) without filament spool
Boxed Dimensions 88.9 cm x 30.48 cm x 66.04 cm (35 in x 12 in x 26 in)
Dimensions with 1kg Filament Spool 83 cm x 71 cm x 52 cm (32.67 in x 28 in x 20.47 in)
Software
Operating System Compatibility GNU/Linux, Mac, Windows
Recommended Software Cura LulzBot Edition Version 3.2 or newer
Firmware Marlin
Supported File Types .stl, .obj, .x3d, .3mf, .png, .jpg
Electrical
Power Requirements 100VAC-240VAC, 50Hz-60Hz, 3.2A max
Output 24VDC, 500 watts, 21 amps
Power Supply PMC-24V150W1AA
Power Cable IEC cord, C13 to region-specific connector
Safety and Compliance
Certifications FCC, CE, WEEE, ETL by Intertek (UL), CA, CSA, RCM, OSHWA
Warranty Includes one-year warranty and access to technical support seven days a week. Optional one, two, or three-year extended warranties available.
Country of Origin Made in Loveland, Colorado USA with premium components.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question